Problem removing PRM REalism 2.o!!!!!!!

[pimpv303]

lo,

ive used PRM realsim 2.0 on our server.
Yesterday we joined ESl and i removed the .pk3 and uped a new config.
When connecting to server somethings going wrong.
In the RPM Config i used only 2 sniper per Team and all other wepons avail.
But i cant check all weapans after removing PRM.
Its still only MP40 or KAR aail but no Sniper and No STG44???
Or only STG44 and no MP40?? and so on............
But why? I removed the pk3 and i used a new standart config???
And my killcam was on with RPM Realsim now it wont wotk again-no killcam??

Any Ideas
Poolmaster youre here???

:( lol plz help me hehe

[imported_PoolMaster]

Uhmmmmmmmmmmmmmm, slow down m8 :wink:

Now what is your problem exactly? Kilcam sniper and Stg> Please clarify what exactly is messed up, your above posts makes my eye's go cross-eyed :P

[pimpv303]

hehe sorry ok

i removed your mod!
placed a normal config on server (without realism settings)
restarted server
joined
cant select all weapons (for example only kar98 or mp40 but no STG and no sniper)
and killcam is off
healtpacks wont be dropped

with your mod the killcam was on (because i wanted so)
without your mod killcam wont work and i cant select all weapons!
i also used no drop of healtpack

But its not all the time, sometimes i could select all weapons and for example on next map i only can select the two above?!?

In a normal config theres no cvar for killcam and drop healtpack!
Could it be that i have to insert the killcam and healtdrop cvars in the normal config after deleting your mod?

Or could it be that other players can select all weapons and the people who played with real mod cant select all (client side problem of changing the values?)

i dunno ..........

(im from GER sorz for my bad english)

[imported_Maxim]

Try deleting the directory that fs_game made in your CoD directory, and make sure that sv_allowdownload is set to 0 as PRM is a server-side only mod and doesn't require it to be downloaded to clients. There seems to be an issue with sv_pure and PRM which if they're used sv_pure wont allow players to connect so sv_pure has to be turned off also. If you added the mod the incorrect way and just placed it in your main directory make sure it's deleted on your (the client side) cod installation also.

[pimpv303]

set allow download "0" never was on 1!
No one of my clan got thta mod installed clientside!
sv_Pure is on but we are all able to connect on our or any other server.

weve got the same Problem as we used CKD beta.

But ther it was easy. I used no HUD in CKR.
Returned CKR still no HUD lol

But you can make HOD on or off in MPOPtions so it was no problem.

And here its a liitle bit more to change back for normal gameplay.

I try that one with fs directory maybe it will work!?!

thx m8

@Poolmaster: You ever removed your MOD and tried playn on the same server with normal settings?
:D

[imported_PoolMaster]

Yes I have, it worked for us....... I will get back to you.

[imported_PoolMaster]

My guy Wolfsbane says:

It must be something to do with his config file. If a weapon limit is reached, PRM disables that weapon. It won't enable it again until another weapon check is done. If he wrote the config file at that point, before removing PRM, that would be a problem.

Whatever the reason, the solution is simple. Have him reactivate the weapons as follows:

set scr_allow_springfield 1
set scr_allow_MG44 1

etc. If he wants a list of all weapon allowances and their setting:

cvarlist scr_allow_

This will show all cvars beginning with scr_allow_, so basically all weapon allowances and things like voting. I think it all fits on one screen, if not he can add individual letters after (i.e. scr_allow_a to show all beginning with a).

Once he's reset all his weapon allowances, do a writeconfig <name> and replace whatever config file he's using with that one.

[OldDog]

I had a similar problem on my server..I uninstalled PRM 2.0, deleted my COD\MyMods directory, removing all references, etc. I then connected to the server from my client and found that I had no crosshairs. Every other player (I grilled each as they came on) had crosshairs, but not me. I finally found out that it was *me*, as a client, and not the server. I had connected, at one point, to a server with PRM installed, but *without* a +fs_game parameter...their PRM mod was in the \MAIN directory (I assume). It screwed up my local .pk3s (well, screwed up is too strong...changed is more like it). What I ended up doing is to uninstall my client, and DELETING the Program Files\Call of Duty directory after a normal uninstall (the DLLs and .cfg files were still there even after an uninstall). I then re-installed, and everything is back to stock.

That said, I really like the PRM mod, and will re-install on my server when 3.0 becomes publicly available (and tested).

-OldDog

[imported_PoolMaster]

Hit escape, go to main menu, multiplayer options, turn your hud back on for your crosshairs m8 :P

3.0 is being publically tested as we speak, full ver due shortly.

[pimpv303]

lo pool,

hm i rechekced our server and uped again a new config, and now everything is allright??!?

lol i dunno why !! hehe but it works again with all standart settings..................

sorz for trouble....

[imported_PoolMaster]

:!: