CFH666
04-21-2003, 02:10 AM
I would post this on the Invisible Warriors forum but dont have an account there.
Anyways I just downlaoded the "setuphonestyAA20.exe" from invisiblewarriors.com and i notic for model detail it changed it to .55 instead of high, also a couple other legit graphical settings have been changed. I also noticed when I dumpusered myself that some setting that used to be set to 0 were now set to 1. I was afraid some people not aware of this would see those as cheating and give me shit. Also, my model detail, tri/bilinear filtering got changed like i said earlier.. I played all day with no problem. Just now I changed the filtering back to trilinear, and everything in the advanced vid options from HIGH back to highest/max. I went onto a server that i frequent and was kicked by CI for modifications/cheats. It gave me 4 codes, but I only caught B and H. cant remember what the other two were.
I deleted the custom.cfg it created and re connected back to the server with the same vid settings that I had when I was kicked, and hadno problem.
I figure with the honesty config setup you cant change any vid setting as it sets some of them in the config.
I was just wondering what was up with this and I think that forcing a certain video setting that would differ for different computers/vidcards is retarded.. Or did something go wrong when I ran the installer?
Here is what it set me up with.
---------------------------------------------------------
//Part of Honesty Config for use with MOHAA Counter Intelligence 1.4.0.0
setu r_light_nolight 0
setu r_showSmp 0
setu r_farplane 0
setu r_farplane_nocull 0
setu r_farplane_nofog 0
setu r_novis 0
setu r_lightmap 0
setu cg_te_dietouch 0
setu r_fullbright 0
setu cg_acidtrip 0
setu cg_lagometer 0
setu r_lockpvs 0
setu cg_3rd_person 0
setu r_vertexlight 0
setu g_showbullettrace 0
setu cg_forcemodel 0
setu cheats 0
setu r_mapOverBrightBits 1
setu r_useglfog 1
setu r_nocull 0
setu r_intensity 1
setu developers 0
setu cg_rain 1
setu r_light_showgrid 0
setu r_light_sun_line 0
setu r_light_lines 0
setu r_entlightmap 0
setu r_directedScale 1
setu r_ambientScale 0.5
setu r_shownormals 0
setu r_showtris 0
setu r_overbrightbits 0
setu r_fastsky 0
setu r_farplane_color .5 .5 .5
setu r_showsky 0
setu r_nobind 0
setu r_showcull
setu r_noportals 0
setu r_portalonly 0
setu r_norefresh 0
setu r_singleshader 0
setu r_znear 3
setu r_flaresize 40
setu r_drawworld 1
setu r_flarefade 7
seta cg_3rd_person 0
seta cg_forcemodel 0
seta cheats 0
seta developers 0
seta r_light_nolight 0
seta r_showSmp 0
seta r_farplane 0
seta r_farplane_nocull 0
seta r_farplane_nofog 0
seta r_novis 0
seta r_lightmap 0
seta r_fullbright 0
seta cg_acidtrip 0
seta r_lockpvs 0
seta r_vertexlight 0
seta g_showbullettrace 0
seta r_mapOverBrightBits 1
seta r_useglfog 1
seta r_nocull 0
seta r_intensity 1
seta cg_rain 1
seta r_light_showgrid 0
seta r_light_sun_line 0
seta r_light_lines 0
seta r_entlightmap 0
seta r_directedScale 1
seta r_shownormals 0
seta r_showtris 0
seta r_overbrightbits 0
seta r_fastsky 0
seta r_farplane_color .5 .5 .5
seta r_showsky 0
seta r_nobind 0
seta r_showcull
seta r_noportals 0
seta r_portalonly 0
seta r_norefresh 0
seta r_singleshader 0
seta r_znear 3
seta r_flaresize 40
seta r_drawworld 1
seta r_flarefade 7
cheats 0
seta r_lodcap .5
seta r_lodscale .55
seta r_lodviewmodelcap .55
setu r_lodcap .5
setu r_lodscale .55
setu r_lodviewmodelcap .55
setu r_picmip 0
seta r_picmip 0
-------------------------------------------------------------------------------------
I also have another question regaurding CI. The other day we had a couple of people come on with the no fog and 3rd person enable. First, the force honesty config did not turn them off(not sure if its supposed to fix that or do something else). I ran dumpuser on them and both settings were set to "1" not "HACKED". Second, CI was not kicking them. It wasn't even detecting them. I had to shut it off and restart a couple times before CI picked it up.
Anyways, after seeing how the force honesty didnt seem to stop no fog/3rd person, and all of us getting fed up with the control getting cut off every single time it ran, we disabled it through mam. We upgraded to CI 1.4.0.0 and the check honesty on team and on player is UN CHECKED under preferences. After CI running for about 10-15 minutes WITHOUT forcing the honesty config, it just starts forcing it out of the blue every minute or so as if turned bakc on throught the mam_security.cfg.
How do we disable CI for doing it. seeing how it didnt seem to stop the problem, and CI will kick people for using those settings, I find it more annoying then effective.
Yes the latest MAM packs are installed and Im positive that it is turned off in the mam_security.cfg
I also want to say good job and getting it to take screenshots of the PATh command. However it is hugely difficult to figure out whats going on as the window blocks yellow writing. took me a couple tries on myself to get a decent screenshot and I did it to a couple in my clan and it didnt even take the screenshots on theirs. I am sure in a later version the bugs will get worked out though. I think screens of the PATH command will come in handy as much as the models.
6
Anyways I just downlaoded the "setuphonestyAA20.exe" from invisiblewarriors.com and i notic for model detail it changed it to .55 instead of high, also a couple other legit graphical settings have been changed. I also noticed when I dumpusered myself that some setting that used to be set to 0 were now set to 1. I was afraid some people not aware of this would see those as cheating and give me shit. Also, my model detail, tri/bilinear filtering got changed like i said earlier.. I played all day with no problem. Just now I changed the filtering back to trilinear, and everything in the advanced vid options from HIGH back to highest/max. I went onto a server that i frequent and was kicked by CI for modifications/cheats. It gave me 4 codes, but I only caught B and H. cant remember what the other two were.
I deleted the custom.cfg it created and re connected back to the server with the same vid settings that I had when I was kicked, and hadno problem.
I figure with the honesty config setup you cant change any vid setting as it sets some of them in the config.
I was just wondering what was up with this and I think that forcing a certain video setting that would differ for different computers/vidcards is retarded.. Or did something go wrong when I ran the installer?
Here is what it set me up with.
---------------------------------------------------------
//Part of Honesty Config for use with MOHAA Counter Intelligence 1.4.0.0
setu r_light_nolight 0
setu r_showSmp 0
setu r_farplane 0
setu r_farplane_nocull 0
setu r_farplane_nofog 0
setu r_novis 0
setu r_lightmap 0
setu cg_te_dietouch 0
setu r_fullbright 0
setu cg_acidtrip 0
setu cg_lagometer 0
setu r_lockpvs 0
setu cg_3rd_person 0
setu r_vertexlight 0
setu g_showbullettrace 0
setu cg_forcemodel 0
setu cheats 0
setu r_mapOverBrightBits 1
setu r_useglfog 1
setu r_nocull 0
setu r_intensity 1
setu developers 0
setu cg_rain 1
setu r_light_showgrid 0
setu r_light_sun_line 0
setu r_light_lines 0
setu r_entlightmap 0
setu r_directedScale 1
setu r_ambientScale 0.5
setu r_shownormals 0
setu r_showtris 0
setu r_overbrightbits 0
setu r_fastsky 0
setu r_farplane_color .5 .5 .5
setu r_showsky 0
setu r_nobind 0
setu r_showcull
setu r_noportals 0
setu r_portalonly 0
setu r_norefresh 0
setu r_singleshader 0
setu r_znear 3
setu r_flaresize 40
setu r_drawworld 1
setu r_flarefade 7
seta cg_3rd_person 0
seta cg_forcemodel 0
seta cheats 0
seta developers 0
seta r_light_nolight 0
seta r_showSmp 0
seta r_farplane 0
seta r_farplane_nocull 0
seta r_farplane_nofog 0
seta r_novis 0
seta r_lightmap 0
seta r_fullbright 0
seta cg_acidtrip 0
seta r_lockpvs 0
seta r_vertexlight 0
seta g_showbullettrace 0
seta r_mapOverBrightBits 1
seta r_useglfog 1
seta r_nocull 0
seta r_intensity 1
seta cg_rain 1
seta r_light_showgrid 0
seta r_light_sun_line 0
seta r_light_lines 0
seta r_entlightmap 0
seta r_directedScale 1
seta r_shownormals 0
seta r_showtris 0
seta r_overbrightbits 0
seta r_fastsky 0
seta r_farplane_color .5 .5 .5
seta r_showsky 0
seta r_nobind 0
seta r_showcull
seta r_noportals 0
seta r_portalonly 0
seta r_norefresh 0
seta r_singleshader 0
seta r_znear 3
seta r_flaresize 40
seta r_drawworld 1
seta r_flarefade 7
cheats 0
seta r_lodcap .5
seta r_lodscale .55
seta r_lodviewmodelcap .55
setu r_lodcap .5
setu r_lodscale .55
setu r_lodviewmodelcap .55
setu r_picmip 0
seta r_picmip 0
-------------------------------------------------------------------------------------
I also have another question regaurding CI. The other day we had a couple of people come on with the no fog and 3rd person enable. First, the force honesty config did not turn them off(not sure if its supposed to fix that or do something else). I ran dumpuser on them and both settings were set to "1" not "HACKED". Second, CI was not kicking them. It wasn't even detecting them. I had to shut it off and restart a couple times before CI picked it up.
Anyways, after seeing how the force honesty didnt seem to stop no fog/3rd person, and all of us getting fed up with the control getting cut off every single time it ran, we disabled it through mam. We upgraded to CI 1.4.0.0 and the check honesty on team and on player is UN CHECKED under preferences. After CI running for about 10-15 minutes WITHOUT forcing the honesty config, it just starts forcing it out of the blue every minute or so as if turned bakc on throught the mam_security.cfg.
How do we disable CI for doing it. seeing how it didnt seem to stop the problem, and CI will kick people for using those settings, I find it more annoying then effective.
Yes the latest MAM packs are installed and Im positive that it is turned off in the mam_security.cfg
I also want to say good job and getting it to take screenshots of the PATh command. However it is hugely difficult to figure out whats going on as the window blocks yellow writing. took me a couple tries on myself to get a decent screenshot and I did it to a couple in my clan and it didnt even take the screenshots on theirs. I am sure in a later version the bugs will get worked out though. I think screens of the PATH command will come in handy as much as the models.
6