COD SERVER setup with E-Tech router

[26-5th]

Hi everyone,
Currently i have an E-Tech router with 2 pc's connected at it.
Now i want to setup a COD server at one of the pc's, playing on it also. The other is for my girlfriend.
I already have tried to open the 28960 port to my LAN adres but still no server on internet, LAN only. I even opened DMZ for my LAN IP and still no result(if i've done it correctly). I am trying now for two monts already and iam going a little bit crazy.
I've put in some pictures of my interface of the router software, maybe someone knows how to configure it the right way ????

http://213.84.152.192/firmware/firmware.htm

[OldDog]

If your config is set up properly with the Master Browsers:

seta sv_gamespy "1" //optional
seta sv_master1 "codmaster.activision.com"
seta sv_master2 "master0.gamespy.com"
seta sv_master3 "master1.gamespy.com"
seta sv_master4 "codauthorize.activision.com"
seta sv_master5 "codmaster.infinityward.com"

and you have used +set dedicated 2 on your CoDMP command line, it can still take some time for your server to be listed in the in-game browser, or GameSpy, or ASE, if that was your intent.

To check, you can use http://inherent.infinityward.com.

As to the ports, there are others. There are also tons of posts in this forum for setting ports. Do a search on "ports" and see a sticky post by RudeDog.

[Titatovenaar]

Kinda makes ya mad, doesn't it? All that tech sh*t.

Well, no worries, I have an E-tech modem also, finally got it working. For me the trick was to make a virtual server on the router, instead of DMZ. If you do that, and look through the posts here for the correct ports, it should help ya a little bit more :!:

Greetz

Tita

[OldDog]

Try this: http://www.olddogvt.net/cod-firewall/