PDA

View Full Version : Punkbuster Console messages issue


tritonb
11-18-2007, 01:09 PM
I checked and in the pb folder had no .cfg files. I added the following (below) which turned on punkbuster streaming plus gave me the scrolling messages.

Now I have several problems:
1) I get lag in our server
2) The punkbuster messages come from me to the everyone in the server, =THS=Tritonb
3) Even if I take out the line, pb_sv_load svrmsgs.cfg from pbsv.cfg and stop/restart the cod4 server through the myIS SCI web interface the messages appear still.

Any ideas?

Here are my current files:

pbsvlog.cfg

;CoD PsB Repository Commands
pb_sv_logaddr rep.punksbusted.com // Repository IP Address
pb_sv_logport 24425 // Repository Port
pb_sv_loguser 10798 // Your Clan ID

pbsvuser.cfg
// PsB Recommended CVAR list for CoD4 Retail by Ross Dagley-Cleworth
// Last updated: 05/10/2007
// Version 1.0

pb_sv_cvarempty //[empty cvar checks before being loaded below]
pb_sv_cvar cg_errordecay in 100
pb_sv_cvar cg_fov IN 65 97
pb_sv_cvar cg_hudDamageIconHeight IN 64
pb_sv_cvar cg_hudDamageIconInScope IN 0
pb_sv_cvar cg_hudDamageIconOffset IN 128
pb_sv_cvar cg_hudDamageIconTime IN 2000
pb_sv_cvar cg_hudDamageIconWidth IN 128
pb_sv_cvar cl_avidemo IN 0
pb_sv_cvar cl_forceavidemo IN 0
pb_sv_cvar cl_freelook IN 1
pb_sv_cvar cl_maxpackets IN 30 100
pb_sv_cvar cl_pitchspeed IN 140
pb_sv_cvar cl_punkbuster IN 1
pb_sv_cvar cl_yawspeed IN 140
pb_sv_cvar com_maxfps OUT 0.000001 40
pb_sv_cvar m_pitch OUT -0.015 0.015
pb_sv_cvar m_yaw IN 0.022
pb_sv_cvar pb_Sleep IN 0 500
pb_sv_cvar rate IN 5000 25000
pb_sv_cvar r_fog IN 1
pb_sv_cvar r_fullbright IN 0
pb_sv_cvar r_picmip IN 0 3
pb_sv_cvar r_polygonOffsetBias IN -1
pb_sv_cvar r_polygonOffsetScale IN -1
pb_sv_cvar r_lightTweakAmbient IN 0 0.3
pb_sv_cvar r_drawdecals IN 1
pb_sv_cvar sensitivity IN 0 30.000001
pb_sv_cvar snaps IN 20 40
pb_sv_cvar fx_freeze IN 0
pb_sv_cvar fx_count IN 0
pb_sv_cvar fx_debugBolt IN 0
pb_sv_cvar fx_draw IN 1
pb_sv_cvar fx_enable IN 1
pb_sv_cvar fx_profile IN 0

pbsv.cfg

;Auto Generated by PunkBuster Server
; Some of the following settings may not apply,
; consult manuals at evenbalance.com for full documentation
pb_sv_MsgPrefix "^3PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)]
pb_sv_KickLen 2 //[Minutes (default=2)]
pb_sv_CvarFreq 2 //[# of range checks per minute]
pb_sv_CvarLogging 0 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 2 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 15 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 120 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 900 //[Max # of seconds to wait before requesting next ss]
pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 0 //[Seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 0 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpRefresh 30 //[Seconds]
pb_sv_HttpKey "" //[Key]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 999 //[Seconds]
pb_sv_ChangeMax 2 //[Max name changes allowed]
pb_sv_DupNameGrace 0 //[Seconds]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 2 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 20 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 600 //[Seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 1 //[Seconds to wait before No GUID kick]
pb_sv_AliasFn "" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)

;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvarempty
pb_sv_cvar "cg_errordecay" IN 100 100
pb_sv_cvar "cg_fov" IN 65 97
pb_sv_cvar "cg_hudDamageIconHeight" IN 64 64
pb_sv_cvar "cg_hudDamageIconInScope" IN 0 0
pb_sv_cvar "cg_hudDamageIconOffset" IN 128 128
pb_sv_cvar "cg_hudDamageIconTime" IN 2000 2000
pb_sv_cvar "cg_hudDamageIconWidth" IN 128 128
pb_sv_cvar "cl_avidemo" IN 0 0
pb_sv_cvar "cl_forceavidemo" IN 0 0
pb_sv_cvar "cl_freelook" IN 1 1
pb_sv_cvar "cl_maxpackets" IN 30 100
pb_sv_cvar "cl_pitchspeed" IN 140 140
pb_sv_cvar "cl_punkbuster" IN 1 1
pb_sv_cvar "cl_yawspeed" IN 140 140
pb_sv_cvar "com_maxfps" OUT 0.000001 40
pb_sv_cvar "m_pitch" OUT -0.015 0.015
pb_sv_cvar "m_yaw" IN 0.022 0.022
pb_sv_cvar "pb_Sleep" IN 0 500
pb_sv_cvar "rate" IN 5000 25000
pb_sv_cvar "r_fog" IN 1 1
pb_sv_cvar "r_fullbright" IN 0 0
pb_sv_cvar "r_picmip" IN 0 3
pb_sv_cvar "r_polygonOffsetBias" IN -1 -1
pb_sv_cvar "r_polygonOffsetScale" IN -1 -1
pb_sv_cvar "r_lightTweakAmbient" IN 0 0.3
pb_sv_cvar "r_drawdecals" IN 1 1
pb_sv_cvar "sensitivity" IN 0 30.000001
pb_sv_cvar "snaps" IN 20 40
pb_sv_cvar "fx_freeze" IN 0 0
pb_sv_cvar "fx_count" IN 0 0
pb_sv_cvar "fx_debugBolt" IN 0 0
pb_sv_cvar "fx_draw" IN 1 1
pb_sv_cvar "fx_enable" IN 1 1
pb_sv_cvar "fx_profile" IN 0 0

;PB UCON Settings / Lists
pb_sv_usessionlimit 0
pb_sv_ucontimeout 300
pb_sv_uconempty
pb_sv_uconignoreempty




svrmsgs.cfg
pb_sv_taskempty

pb_sv_TaskDel 1
pb_sv_TaskDel 2
pb_sv_TaskDel 3
pb_sv_TaskDel 4

// Task setup for PunkBuster

pb_sv_task 40 280 "say ^2Welcome to Team HeadShot"
pb_sv_task 80 280 "say ^5Visit us at^1 www.teamheadshot.com ^5 We are Recruiting"
pb_sv_task 120 280 "say ^1ABSOLUTLEY ^3NO ^1ADVERTISING ON THIS SERVER"
pb_sv_task 160 280 "say ^3CHEATERS will be caught and banned!"

theMechanic
11-18-2007, 03:53 PM
well, your loading the cvar checks twice for one thing, take em out of the pbsv.cfg.
second, just put the messages in the pbsv.cfg so they load at startup, and you dont need all these:

pb_sv_TaskDel 1
pb_sv_TaskDel 2
pb_sv_TaskDel 3
pb_sv_TaskDel 4

CSAReaper
11-18-2007, 05:34 PM
as Mechanic stated that cvars are being loaded twice.

but I would leave the these in:

pb_sv_TaskDel 1
pb_sv_TaskDel 2
pb_sv_TaskDel 3
pb_sv_TaskDel 4

b/c it will stop your PB messages from doubling or tripling up at the sametime, either way your messages will still work

Possiblity that the messages state they are coming you is b/c of streaming to punksbusted.com